Sketch in. Priced quote out.
The agent takes a measured sketch through the job you already do. It redraws the layout in CAD, carries the takeoff into your estimating software, and builds and sends the priced quote.
- Field sketch96 × 36 in · one cutout
- CAD and takeoffCAD layout · 24 sq ft
- Quote sentMaterial + labor quote
Read this example
- Field sketch
- A 96 × 36-inch island with one sink cutout and a finished edge on three sides.
- CAD and takeoff
- The layout carries the supplied dimensions. The rectangular top measures 24 square feet before any waste or overage rules.
- Quote sent
- Stone, edge finishing, cutout and installation appear as separate lines using the shop’s rates.
Sound familiar?
For shops that redraw field sketches, measure the job in CAD and enter the quantities again to price it.
Carry the same dimensions from drawing to quote
-
Start with the measured input
Read the sketch or marked-up plan alongside the field notes. Use the stated units and identify which drawing revision the quote should reference.
-
Build the layout and quantities
Use your CAD workflow to turn the dimensions into a layout. Apply the shop’s takeoff method for area, edge lengths, counts and waste.
-
Price and send
Take the quantities into your quoting tool, apply your rates, and send the quote with the layout or drawings your process calls for.
What changes for your team
One set of dimensions
Carry the supplied measurements through the CAD layout, takeoff and quote.
The whole job priced
Include the material, edges, cutouts and installation that your estimating process calls for.
Drawing and quote together
Send the priced proposal with the exported layout when that is part of your process.
Common questions
Can I start with a photo of a hand sketch?
Yes, when the photo and accompanying notes provide the dimensions and other inputs your process needs. The agent uses those measurements to build the layout.
What if a dimension is missing?
Configure which dimensions are required and how to request a missing measurement. The affected quantity stays unresolved until the workflow has the input it needs.
Can the quote include the CAD layout?
Yes. If your process exports a drawing or layout, the agent can include that file when it sends the quote.
Connect the next step
One quoting process can span several workflows. Explore the parts that fit yours.
Your next quote. Already handled.
From the first request to the finished quote, in the software you already use.
no new system. no integrations. ↗